42BYGH 2 phase 1.8 degree Nema 17 Integrated Stepper Motor
The ADVANTAGE of Step motor:
Advantages of step motors are low cost, high reliability, high torque at low speeds, and simple, rugged construction that operates in almost any environment. The main disadvantage in using a stepper motor is the resonance effect often exhibited at low speeds and decreasing torque with increasing speed.
42BYGH series motors are all able to add the integrated driver.
Motor Electrical Specification:
| MODEL | STEP ANGLE
(°/STEP) | LEAD WIRE
(NO.) | VOLTAGE
(V) | CURRENT
(A/PHASE) | RESISTANCE
(Ω/PHASE) | INDUCTANCE
(MH/PHASE) | HOLDING TORQUE
(G.CM) | MOTOR HEIGHT
L(MM) | MOTOR WEIGHT
(KG) |
| 42BYGH208-52A | 1.8 | 4 | 12 | 0.4 | 30 | 42 | 2500 | 34 | 0.20 |
| 42BYGH243-03 | 1.8 | 4 | 2.6 | 1 | 2.6 | 3.2 | 1800 | 34 | 0.20 |
| 42BYGH622-28A | 1.8 | 4 | 4.8 | 1 | 4.8 | 6.0 | 2900 | 40 | 0.24 |
| 42BYGH613-68A | 1.8 | 4 | 2.5 | 1.7 | 1.5 | 2.5 | 3500 | 40 | 0.24 |
| 42BYGH705-07 | 1.8 | 4 | 12 | 0.3 | 40 | 80 | 4000 | 44 | 0.30 |
| 42BYGH721A | 1.8 | 6 | 10 | 0.25 | 40 | 36 | 2000 | 44 | 0.30 |
| 42BYGH801-36 | 1.8 | 6 | 12 | 0.4 | 30 | 22 | 3800 | 48 | 0.34 |
| 42BYGH872A | 1.8 | 4 | 2.8 | 1.7 | 1.65 | 2.8 | 4500 | 48 | 0.34 |
| 42BYGH910-02 | 1.8 | 4 | 5.1 | 1.5 | 3.4 | 8.0 | 8500 | 60 | 0.49 |
| 42BYGH905-13 | 1.8 | 4 | 3.15 | 1.5 | 2.1 | 5.0 | 6800 | 60 | 0.49 |
***Note: The products can be customized by your request. Please contact us for more details.
Driver Manual
HTD421 2 phase Parallel interface driver
Product Feature
Miniature design, convenient installation, can be integrated with 42 stepper motors
- Heat-dissipated cast aluminum enclosed housing
- Automatic half current when stopped running
- Parallel interface high-speed photoelectric isolation, compatible with 3.3-5V and 12-24V logic levels 2A continuously adjustable
- Microstep 1/2/4/8/16/32 optional subdivision
Product Parameter
| POWER SUPPLY | DC 12V-DC 35V/2A, DC 24V is recommended |
| Parallel interface | VCC | Power supply. DIP switch selection 3.3V-5V or 12V-24V |
| DIR | 0V or VCC. Current:8mA@3.3V/8mA@12V/15mA@5V/18mA@24V |
| STP | 0V or VCC. Current:8mA@3.3V/8mA@12V/15mA@5V/18mA@24V Frequency 0-20KHz |
| EN | 0V or VCC. Current:8mA@3.3V/8mA@12V/15mA@5V/18mA@24V Frequency 0-20KHz |
| Output Motor current | Peak 2A (single-phase maximum), actual use 0-2A adjustable |
| Drive Method | Constant current PWM control |
| Drive Subdivision | DIP switch setting selection 1, 2, 4, 8, 16, 32 |
| Insulation resistance | > 100M－ at normal temperature and pressure |
| Dielectric strength | 0.5KV, 1 minute at normal temperature and pressure |
| Protection | Input reverse connection, overload, drive overheat, drive overcurrent |
The driver has the same hole position and size as the 42 stepper motor.
Product Advantage
The advantages of integrated motors include ease of layout, reduced wiring complexity, faster system setup and construction, and motor driver compatibility. In addition, an integrated unit with an integrated control system is also provided.
The benefits of the integrated motor and drive units include ease of implementation, reduced wiring complexity, faster setup and construction of a system, and guaranteed motor-drive compatibility. Additionally, integrated units that incorporate systems on a chip (SoC) are also available.
Product Tags:
|
|
1.7a 42BYGH Nema 17 Integrated Stepper Motor 2 Phase 4 Wire 1.8 Degree Images
|
